Fuel

I have made special arrangements with Sig Mfg. to sell Sig Fuels anywhere in the 48 contiguous states.  In order for this to work for all of us, fuel must be ordered in 6 case (24 gal.) quantities, but there are NO HazMat charges.  Price varies slightly depending upon nitro content and distance shipped, but in most cases it will be about $18.00 per gallon delivered to your door.  Additional price cuts in larger quantities.

Sig's quality is the best in the business and I am pleased to be able to make Sig Fuels available to you.  Please call or write for more information.

Tom Dixon
P.O. Box 671166
Marietta, GA  30066
(770) 592-3279

(2/4/05)

FUEL TANKS

I stock fuel tanks by GRW in sizes below.  I believe these to be the best quality metal tanks available.  Other sizes can be obtained but may require special order to the manufacturer.

HARDWARE

MUFFLERS:
In addition to factory mufflers supplied with engines, I also sell:

DOUBLE STAR LITE MUFFLERS - For DS engines, OS FP, ST 46-51, Fox 35 (specify which).
     Tube Type (1 oz.)---------------------------------------$35.00
     Tongue Type (1/2 oz.)----------------------------------$25.00

NEEDLE VALVE ASSEMBLIES:
Double Star Large NVA (.60)------------------------------$12.00
Double Star Small NVA (.40 to .60L)----------------------$10.00

VENTURIS - I usually have venturis on hand to fit the engines I work on, but I recommend you send the engine to me to be absolutely sure parts fit.  These are sold with O-ring-------------------$12.00 each.

.280 is a good size for .40's to .46's
.285 is a good size for .46's to .50's
.290 is a good size for .60's & .61's

Individual preference and power needs can vary, of course.  Always run the smallest venturi which gives adequate power.  It saves fuel and gives smoother engine runs.

CONTROL HORNS - Made of tweakable wire, 3/32" or 1/8" diameter; upright has holes at 1.0, .75, & .5 inch spacings.  Supplied unbent 7" long, you bend to suit your application------------$6.00 each

INLINE FLAP HORNS - 1/8 wire, offset pushrod holes.  For models such as KA-10, Charisma II, or Avanti with wing and tail "in-line-----------------$10.00

BOLLY CARBON FIBRE LANDING GEAR - These fit such designs as the KA-10 and Charisma II.
-------------------$32.00

BRODAK 3" BELLCRANK (NYLON)----------$2.00
BRODAK 4" BELLCRANK (NYLON)----------$3.00
BRODAK #760 LEADOUT GUIDE--------------$4.00 ea.

SULLIVAN C-D LEADOUT CABLE - Pkg is 5 ft.  2 pkgs needed for large .60 planes.  $8.50 pkg

SIG R/C GLOW PLUG - Best I've ever used!  $5.99